TDL-K TDL-KP LED Keychain
ABS and Cast Acrylic
Red, blue, green, white, purple, ryan light
Fading light mode and flashing light mode
2 pieces CR1220 button batteries
4mm thick acrylic plate (optional)
TDL-KP Packing List: 1PC LED Bud with key ring, 1PC Blank Acrylic Plate
TDL-K Packing List: 1PC LED Bud with key ring
1. Tear off the protective films from the acrylic plate. 2. Push power switch to “ON” position.
3. Press the mode button to set light color and mode. Fading light mode→Flashing light mode→Blue→Green→Red→Cyan→Orange→Purple→White
4. Push power switch to “OFF” position to turn it off.
5. How to change batteries?
Unscrew the 4 screws and take out old batteries. Load new CR1220 button batteries.
- Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate.
- This product is designed for indoor usage only. It is not waterproof.
- Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides.
- Do not touch acrylic plate surface with your fingers as there will be fingerprints.
How to Hold Acrylic Plate
- Please put switch to "OFF" position if you do not use it for a long time.