TDL-S3 TDL-S2 TDL-SS Base

The manual is applicable for TDL-S2 TDL-SS TDL-S3 led bases with remote.

Please read this instruction before using the 3D lamp base. This user manual is for your safety and help you obtain the best performance from this product.

1. Specifications

Model Number	TDL-S3 TDL-S2 TDL-SS
Input Voltage	4.5V-5V
Power Input	USB Cable (included) or 3 x AA Batteries (not included)
Output Power	2 ~ 2.5W
Number of LED	10 pcs RGB SMD LEDs
Light Color	Red, Green, Blue, Yellow, Cyan, Pink, White
LED Base Size	85mm(D) x 40mm(H)
LED Base Weight	70g
LED Base Slot	71mm(L)*4mm(W)*16mm(Depth)

Packing
Unit Package Weight	0.11KG
QTY / CTN	200 pieces each carton box
Carton Dimension	56cm x 45.5cm x 33CM
CTN Net/Gross Weight	21KG/22KG

2. Packing List

TDL-S3 TDL-S2 TDL-SS Packing List:

LED base, 24 Key IR Remote Control, USB cable, manual (pack in foam bag)

LED Lamp Packing List

3. How to Use

1. Remove the transparent protective film from both sides of the acrylic plate.

2. Insert acrylic plate in 3D LED base.

3. Connect USB cable to power supply/computer or load 3 pieces AA batteries.

4. Press the power button to turn on.

5. Press the power button to change light color. Each time the power button is pressed, the lamp will change light color. There are 7 light colors (red, green, blue, yellow, cyan, purple and white). There are also fading RGB light mode and flashing RGB light mode.

6. Long hold the button for 2~4 seconds to turn it off.

694KB

TDL-S3 led base with remtoe.pdf

PDF

Open

Download User Manual TDL-S3

Remote Control Manual

4. Safety Instructions

• This product is designed for indoor usage only. It is not waterproof.

• Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides.

• Do not touch acrylic plate surface with your fingers as there will be fingerprints.

How to hold acrylic plate

• To insert AA batteries, please slide off battery cover and load new batteries.

• Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision.

• Do not mix standard AA batteries with rechargeable ones.

• Please do insert batteries with the correct polarity.

• Please remove exhausted batteries timely.

• Please always turn off the lamp overnight or when you do not use it.