Comment on page
TDL-R LED Base
Model Number | TDL-R |
Color | Black |
Dimension | 100mm(L) x 80mm(W) x 42mm(H) |
Slot | 80mm(L) x 4mm(W) x 14mm(Depth) |
Net Weight | 170g |
LED Source | 10pcs SMD RGB LEDs |
Light Color | 16 RGB Light Colors |
Charging Time | 3~4 hours |
Output Power | 3W |
Battery | Built-in rechargeable 1200mAh 18650 battery |
Unit Package Weight | 0.18KG |
1PC LED Lamp Base with Built-in Battery
1PC IR Remote, 1PC USB Charge Cable with manual(USB Charger is not included)

TDL-R LED Lamp Base Packing List
- 1.Remove the transparent protective film from both sides of the acrylic plate.
- 2.Insert acrylic plate in 3D LED base.
- 3.Connect USB cable to power supply/computer or load 3 pieces AA batteries.
- 4.Press the power button to turn on.
- 5.Press the power button to change light color. Each time the power button is pressed, the lamp will change light color. There are 7 light colors (red, green, blue, yellow, cyan, purple and white). There are also fading RGB light mode and flashing RGB light mode.
- 6.Long hold the button for 2~4 seconds to turn it off.

Remote Control Manual
- This product is designed for indoor usage only. It is not waterproof.
- Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides.
- Do not touch acrylic plate surface with your fingers as there will be fingerprints.

How to hold acrylic plate
- To insert AA batteries, please slide off battery cover and load new batteries.
- Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision.
- Do not mix standard AA batteries with rechargeable ones.
- Please do insert batteries with the correct polarity.
- Please remove exhausted batteries timely.
- Please always turn off the lamp overnight or when you do not use it.