TDL-WS Rectangle Wood Base
Solid Beech (wood base), PCBA and Rubber (USB Cable)
150mm(L) x 44mm(W) x 30mm(H)
15cm(L) x 10mm(Depth) x 5mm or 10mm(width)
7 RGB Lights, flashing and fading mode or single light color: pure white/warm white
7 pieces SMD LED
Wood LED Base with usb cable and led strip
1. Please connect USB cable to USB power adapter or computer.
2. Press the “Mode” button and the LED strip light up. Below light color light up by turns.
Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights.
The final light color is red and then press Mode button to turn it off.
3. Press “+” button to turn up brightness and press “-” to turn down brightness.
4. Peel off the protective films on both side of acrylic plate and insert acrylic plate.
USB Cable Button Functions
- Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate.
- This product is designed for indoor usage only. It is not waterproof.
- Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides.
- Do not touch acrylic plate surface with your fingers as there will be fingerprints.
How to Hold Acrylic Plate
- To insert AA batteries, please slide off battery cover and load new batteries.
- Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision.
- Do not mix standard AA batteries with rechargeable ones.
- Please do insert batteries with the correct polarity.
- Please remove exhausted batteries timely.
- Please always turn off the lamp overnight or when you do not use it.