Comment on page
TDL-WR Wood Base
Model Number | TDL-WR |
Dimension | 9cm(D)4.5cm(H), Slot: 4mm(W)65mm(L)*18mm(depth) |
Net Weight | 200g |
LED Quantity | 8 pieces |
Power Input | DC 5V 1A; 3 pieces AA batteries |
Output Power | 2~2.5W |
Light Colors | RGB Lights |

TDL-WR LED Base Dimension
1PC Wood LED Lamp Base
1PC USB Charge Cable (USB Charger is not included)
1PC Mini 17 Key IR Remote Control (button battery is included)
(24 key IR Remote is optional)
-711x711_0.jpg?alt=media&token=4c99fe37-1e79-41b5-9203-e63ac2cde715)
TDL-WR LED lamp base packing list
(1). Insert the Acrylic panel into the base;
(2). Connect to USB cable and USB charger;
(3). Set brightness, color, mode with IR remote control.
- Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate.
- This product is designed for indoor usage only. It is not waterproof.
- Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides.
- Do not touch acrylic plate surface with your fingers as there will be fingerprints.

How to Hold Acrylic Plate
- To insert AA batteries, please slide off battery cover and load new batteries.
- Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision.
- Do not mix standard AA batteries with rechargeable ones.
- Please do insert batteries with the correct polarity.
- Please remove exhausted batteries timely.
- Please always turn off the lamp overnight or when you do not use it.
Last modified 2yr ago