# Manual Solution Supports ### 1. Use Manual Navigate {% tabs %} {% tab title="LED Base" %} [TDL-C TDL-C-White TDL-CS](/led-lamp-base-manual/3d-optical-lamp-rgb-lights-manual) | [TDL-S ](/led-lamp-base-manual/round-3d-lamp-led-base-rgb-remote) | [TDL-S3 TDL-S2](/led-lamp-base-manual/3d-lamp-led-base-remote-rgb-lights) [TDL-WS](/led-lamp-base-manual/rectangle-wood-led-base-3d-lamp-custom-made) | [TDL-W3](/led-lamp-base-manual/oval-wood-led-lamp-base-acrylic-white-light) | [TDL-WL TDL-W12](/led-lamp-base-manual/oval-wood-led-lamp-base-custom-made) | [TDL-WR](/led-lamp-base-manual/round-wood-base-rgb-lights-remote) [TDL-O](/led-lamp-base-manual/flat-3d-led-base-rgb-lights-remote) | [TDL-D](/led-lamp-base-manual/mini-clock-3d-led-lamp-base-rgb-lights) | [TDL-L](/led-lamp-base-manual/clock-3d-lamp-led-lamp-base-remote) | [TDL-X](/led-lamp-base-manual/wall-plug-led-3d-lamp-base) | [TDL-F17](/led-lamp-base-manual/mini-led-wood-photo-frame-3d-optical-lamp) [TDL-G TDL-GS](/led-lamp-base-manual/led-edge-lit-acrylic-sign-rgb-lights) | [TDL-R](/led-lamp-base-manual/rechargeable-3d-led-lamp-base-remote-rgb-lights) | [TDL-CA](/led-lamp-base-manual/tdl-ca-app-led-base) {% endtab %} {% tab title="3D Lamp" %} [TDL-PRO TDL-BK](/led-lamp-base-manual/3d-optical-lamp-rgb-lights-manual) | [TDL-P TDL-PP TDL-Plus](/led-lamp-base-manual/led-photo-frame-3d-lamp-rgb-lights-remote) [TDL-TK](/led-lamp-base-manual/table-led-photo-frame-3d-lamp) | [TDL-WA](/led-lamp-base-manual/oval-wood-led-base-4mm-rgb-light-3d-lamp) | [TDL-BSK](/led-lamp-base-manual/bluetooth-speaker-3d-led-lamp-base) | [TDL-LP TDL-LK](/led-lamp-base-manual/clock-3d-lamp-led-lamp-base-remote) | [TDL-C4P](/led-lamp-base-manual/4-light-color-3d-led-lamp) {% endtab %} {% tab title="LED Keychain" %} [TDL-ZP TDL-Z](/led-keychain-manual/rechargeable-led-acrylic-keychain-rgb-lights) | [TDL-KP TDL-K](/led-keychain-manual/mini-led-acrylic-keychain-badge-diy-3d-lamp) {% endtab %} {% tab title="LED Strip" %} [PCB-20S](/led-strip-manual/hard-usb-led-strip-5v-custom-length-diy) | [PCB-30 PCB-40 PCB-100](/led-strip-manual/usb-led-strip-rgb-lights-5v-diy-led-board) [PCB-70](/led-strip-manual/pcb-70-app-usb-led-strip) | [PCB-80](/led-strip-manual/pcb-80-addressable-usb-led-strip) {% endtab %} {% tab title="LED Bar" %} [TDL-U TDL-US](/led-bar-sign-clamp-led-edge-lit-sign-diy) | [TDL-U15](/tdl-u15-led-bar) [TDL-UU](/tdl-uu) | [TDL-U6](/tdl-u6-dual-light-led-bar) {% endtab %} {% endtabs %} ### 2. Solution # TDL-S2S Dual Light LED Base TDL-S2S 3D LED lamp base has dual ligth colors and includes IR remote and USB cable. There are 10 pieces LED totally. Left and right LED display 7 kinds light colors, fading flashing RGB separately. ### 1. Specifications | Model Number | TDL-S2S | | -------------- | ------------------------------------------------- | | Material | Plastic | | Dimension | 89mm(D) \* 44mm(H) | | Net Weight | 72g | | Slot Dimension | 70mm(L)*4mm(W)*16mm(Depth) | | LED Source | 10pcs RGB LED | | Light Color | 7 RGB lights, flashing mode and fading light mode | | Light Color | 10,000 hours | | Power Input | DC 5V 1A, 3 pieces AA batteries | ### 2. Packing List: 1 piece LED Lamp Base (pack in foam bag), 1pc USB Charge Cable, 1pc IR remote control ### 3. How to Use 1\. Connect to USB power source with USB cable or load 3 pieces AAA batteries. 2\. Insert acrylic plate. 3\. Tap the button and control via remote control. ![Remote control for TDL-S2S LED Base](/files/-MhfbaJn0Uqjovv8EsPC) **Demo Video:** [https://youtu.be/2f2IWjqjGmQ](https://youtu.be/hCjlfJi4MMg) ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-CA APP LED Base LED lamp base TDL-CA is well-made 3D Lamp LED base for making 3D LED lamp, LED signs. With mobile APP, you can turn it on/off, set timer, brightness, light color, light mode easily. Please read this instruction before using our 3D lamp. This user manual is for your safety and help you obtain the best performance from this product. ### **1. Specifications** | Model Number | TDL-CA | | --------------- | --------------------------------------------------------------------------------------------------- | | Input Voltage | 4.5V-5V | | Power Input | USB Cable (included) or 3 x AA Batteries (not included) | | Output Power | 2 \~ 2.5W | | Number of LED | 9 pieces RGB SMD LEDs | | Light Color |

Red, Green, Blue, Yellow, Cyan, Pink, White

(16 million kinds of light colors on APP)

| | LED Base Size | 85mm(D) x 43mm(H) | | LED Base Weight | 70g | | LED Base Slot | 71mm(L)\*4mm(W)\*16mm(Depth) | ### 2. Packing List 1PC LED Light Base, 1PC USB Charge Cable (USB Charger is not included. Pack in foam bag) ### 3. How to Use 1. Remove the transparent protective film from both sides of the acrylic plate. 2. Insert acrylic plate in 3D LED base. 3. Connect USB cable to power supply/computer or load 3 pieces AA batteries. 4. Press the power button to turn on. 5. Press the power button to change light color. Each time the power button is pressed, the lamp will change light color. There are 7 light colors (red, green, blue, yellow, cyan, purple and white). There are also fading RGB light mode and flashing RGB light mode. 6. Long hold the button for 2\~4 seconds to turn it off. 7. Search Synkitt on Google play store or Apple APP store, install it and enable Bluetooth. Pair with base and set on APP. ### 4. Download PDF Manual {% file src="/files/-Mhh1S\_2aJL-PrULtd6h" %} User Manual of TDL-CA LED Base {% endfile %} ### 5. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 6. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-WC-B Wood LED Base TDL-WC-B oval wood LED base is made of solid beech. There are 7 kinds of RGB light colors and fading light mode available. The slot length is 11.5cm. It comes with USB cable and touch button. There i ### 1. Specifications | Model Number | TDL-WC-B | | -------------- | ------------------------------------------------- | | Material | Beach | | Dimension | LED base: 145mm\*60mm\*35mm(H) | | Net Weight | 175g | | Slot Dimension | 120mm\*5mm | | LED Source | 7pcs RGB LED | | Light Color | 7 RGB lights, flashing mode and fading light mode | | Light Color | 10,000 hours | | Power Input | DC 5V 1A, 3 pieces AAA batteries | ### 2. Packing List: 1PC Wood LED Base with USB Cable (pack in white foam bag) ### 3. How to Use 1\. Connect to USB power source with USB cable or load 3 pieces AAA batteries. 2\. Peel off the protective film on both side of acrylic plate. 3\. Touch Button Function: (1) Turn on/Turn off: Tap the button to turn it on. Double tap to turn it off. (2) Set light brightness (in fixed light color)：Long touch for 4\~5 seconds to set brightness. (3) Set light color: Tap the button and light colors changes each time when you tap. Below light color lights up by turns: Red - Green - Blue - Orange - Purple - Cyan - White, Fading RGB light mode. (4) Light color/mode memory function: It lights up with the same light color/light mode as last time you turn it off. **Demo Video:** ![](/files/-MhghEzadPj5Geiiqjin) ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-WS Rectangle Wood Base ### 1. Specification | Model Number | TDL-WS | | -------------- | ----------------------------------------------------------------------------------- | | Material | Solid Beech (wood base), PCBA and Rubber (USB Cable) | | Base Dimension | 150mm(L) x 44mm(W) x 30mm(H) | | Slot Dimension | 15cm(L) x 10mm(Depth) x 5mm or 10mm(width) | | Net Weight | 230g | | Light Color | 7 RGB Lights, flashing and fading mode or single light color: pure white/warm white | | LED Source | 7 pieces SMD LED | | Certification | CE, RoHS | | Warranty | One Year | ### 2. Packing List Wood LED Base with usb cable and led strip ### 3. How to Use 1\. Please connect USB cable to USB power adapter or computer. 2\. Press the “Mode” button and the LED strip light up. Below light color light up by turns. Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights. The final light color is red and then press Mode button to turn it off. 3\. Press “+” button to turn up brightness and press “-” to turn down brightness. 4\. Peel off the protective films on both side of acrylic plate and insert acrylic plate.
USB Cable Button Functions
### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-W3 Dual White Color Base ### 1. Specification | Model Number | TDL-W3 | | -------------- | ----------------------------------------------- | | Material | Solid Beech | | Dimension | 150mm x 60mm x 40mm (LED Base) | | Slot Dimension | 11.5cm(L) x 1.8cm(Depth) x 5mm(width) | | Acrylic Plate | Suitable for 5mm thick acrylic plate | | LED Source | 14pcs LEDs | | Power Input | DC 5V 1A | | Light Color | Pure white 6000K, warm white 3500K, white light | | Certification | CE | | Warranty | 1 Year | ### 2. Packing List One piece wood led base with usb cable and led strip
TDL-W3 Wood Base
### 3. How to Use 1\. Please connect USB cable to USB power adapter or computer. 2\. Press the Switch button to turn it on. 3\. Press “+” button to turn up brightness and press “-” to turn down brightness. 4\. Press “Swift” btton to change light colors: pure white light, warm white light and white light. ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-G TDL-GS LED Sign ### 1. Specifications | Model Number | TDL-G TDL-GS | | ------------------- | ------------------------------------------------------------ | | Material | Acrylic （New Version: plastic, acrylic） | | Dimension | 19.5cm x 30cm *(acrylic plate dimension: 17.5cm\**30cm) | | Light Color | Pure White, Blue, Red, Green, Purple, Cyan, Orange | | Power Input | DC 5V 1A | | Output Power | 2\~2.5W | | Unit Package Weight | 0.38KG | ### 2. Packing List **TDL-G Packing List:** 1 piece LED acrylic sign with USB cable, 1 piece chain and 2 pieces acrylic supports **TDL-GS Packing List:** 1 piece LED acrylic sign with USB cable, 1 piece chain and 2 pieces acrylic supports, 1 piece remote control ### 3. How to Use 1. Please connect USB cable to USB power adapter or computer. 2. Press the “Mode” button and the LED strip light up. Below light color light up by turns. Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights. The final light color is red and then press Mode button to turn it off. 3. Press “+” button to turn up brightness and press “-” to turn down brightness. 4. TDL-GS includes remote control.
Buttons on USB Cable
![Remote Control of TDL-GS](/files/-MiK_ZMfS6XMZVt843Mf) ![Hang up with 40cm long chain](/files/-MiKa43gh1USKtnQ3fGY) ![Put on Table with Plastic Supports](/files/-MiKa43hfoV8jHYgIcOQ) ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-WR Wood Base ### 1. Specifications: | Model Number | TDL-WR | | ------------ | ------------------------------------------------- | | Dimension | 9cm(D)4.5cm(H), Slot: 4mm(W)65mm(L)\*18mm(depth) | | Net Weight | 200g | | LED Quantity | 8 pieces | | Power Input | DC 5V 1A; 3 pieces AA batteries | | Output Power | 2\~2.5W | | Light Colors | RGB Lights | ![TDL-WR LED Base Dimension](/files/-Mb9Cqk34P2rK-wCjHZQ) ### 2. Packaging: 1PC Wood LED Lamp Base 1PC USB Charge Cable (USB Charger is not included) 1PC Mini 17 Key IR Remote Control (button battery is included) (24 key IR Remote is optional) ![TDL-WR LED lamp base packing list](/files/-Mb9CGG86HHimOevBAU0) ### 3. How to Use (1). Insert the Acrylic panel into the base; (2). Connect to USB cable and USB charger; (3). Set brightness, color, mode with IR remote control. ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-W12 TDL-WL ### 1. Specification | Model Number | TDL-WL TDL-W12 | | -------------- | ----------------------------------------------------------------------------------- | | Material | Solid Beech (wood base), PCBA and Rubber (USB Cable) | | Slot Dimension | 11.5cm(L) x 1.8cm(Depth) x 5mm(width) | | Base Dimension | 60mm(W) x 145mm(L) x 35mm(H) | | Net Weight | 230g | | Light Color | 7 RGB Lights, flashing and fading mode or single light color: pure white/warm white | | LED Source | 7 pieces SMD LED | | Certification | CE, RoHS | | Warranty | One Year | ### 2. Packing List Wood LED Base with usb cable and led strip ### 3. How to Use 1\. Please connect USB cable to USB power adapter or computer. 2\. Press the “Mode” button and the LED strip light up. Below light color light up by turns. Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights. The final light color is red and then press Mode button to turn it off. 3\. Press “+” button to turn up brightness and press “-” to turn down brightness.
USB Cable Button Functions
### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-C4P 4 Light Color Lamp This manual is also applicable for TDL-C4 led base. ### 1. Specifications | Model Number | TDL-CP | | ------------------- | ----------------------------------- | | Color | Black | | LED Source | 44 pcs SMD LEDs | | Light Color | Red, Green, Blue, Yellow | | Power Input | 3xAA battery (not included); DC 5V | | Output Power | 5\~5.5W | | Unit Package Size | 21.5cm(L) x 15.5cm(W) x 3cm(H) | | Unit Package Weight | 0.39KG | ### 2. Packing List 4pcs Blank Cast Acrylic Plates, 1pc LED Lamp Base, 1pc USB Charge Cable (USB Charger is not included) ![TDL-C4P lamp kit packing list](/files/-MbCTo9HDj0-7DbHSA0p) ### 3. How to Use 1\. Tear off protective films from the 4 pieces acrylic plates. Insert the Acrylic panels into LED lamp base. 2\. Connect to USB cable and USB charger (or load 3 pieces AA batteries). 3\. Long touch the switch for 4\~5 seconds to turn it on. The yellow, green, blue and red LEDs light up by turns. 4\. Touch again and these 4 lights colors are fixed. 5\. Long touch the swtich for 4\~5 seconds to turn it off. For more details, please view the user's manual. ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-O LED Base ### 1. Specifications | Model Number | TDL-O | | ------------------- | ------------------------------------------- | | Color | White | | Material | Plastic | | Dimension | 14CM x 5.7CM x 1.6CM | | Slot for Acrylic | 10.8cm(L)\*4mm(Width) | | Light Color | Red, Green, Blue, Yellow, Cyan, Pink, White | | Net Weight | 70g | | Unit Package Weight | 0.08KG | | Power Input | DC 5V 1A | ### 2. Packing List 1PC Flat Oval LED Lamp Base，1PC USB Charge Cable，1PC Mini IR Remote with manual ### 3. How to Use 1. Remove the transparent protective film from both sides of the acrylic plate. 2. Insert acrylic plate in this flab LED base. 3. Connect USB cable to power supply/computer. 4. Please turn it on with remote, then set light color, brightness, light mode etc. ![](/files/-Mb746XD7O5maiVtwL19) ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-R LED Base ### 1. Specifications | Model Number | TDL-R | | ------------------- | ------------------------------------------- | | Color | Black | | Dimension | 100mm(L) x 80mm(W) x 42mm(H) | | Slot | 80mm(L) x 4mm(W) x 14mm(Depth) | | Net Weight | 170g | | LED Source | 10pcs SMD RGB LEDs | | Light Color | 16 RGB Light Colors | | Charging Time | 3\~4 hours | | Output Power | 3W | | Battery | Built-in rechargeable 1200mAh 18650 battery | | Unit Package Weight | 0.18KG | ### 2. Packing List 1PC LED Lamp Base with Built-in Battery 1PC IR Remote, 1PC USB Charge Cable with manual(USB Charger is not included) ![TDL-R LED Lamp Base Packing List](/files/-MbCNVxfAsGHbfjqOiXZ) ### 3. How to Use 1. Remove the transparent protective film from both sides of the acrylic plate. 2. Insert acrylic plate in 3D LED base. 3. Connect USB cable to power supply/computer or load 3 pieces AA batteries. 4. Press the power button to turn on. 5. Press the power button to change light color. Each time the power button is pressed, the lamp will change light color. There are 7 light colors (red, green, blue, yellow, cyan, purple and white). There are also fading RGB light mode and flashing RGB light mode. 6. Long hold the button for 2\~4 seconds to turn it off. ![Remote Control Manual](/files/-Mb7-qufrcLSiQ88Yq2g) ### 4. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to hold acrylic plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-TK Table Photo Frame ### 1. Specification | Model Number | TDL-TK | | ----------------------- | ------------------------------------------- | | Material | Plastic, PMMA (cast acrylic) | | Photo Frame Dimension | 19cm x 19.5cm x 3cm | | Acrylic Plate DImension | 15.2cm\*16cm | | Net Weight | 350g | | Light Color | Red, Green, Blue, Yellow, Cyan, Pink, White | | Power Input | 3xAAA battery (not included); DC 5V | | Output Power | 3W | | Unit Package Size | 19.5cm(L) x 20cm(W) x 3.5cm(H) | | Unit Package Weight | 0.42KG | ### 2. Packing List One piece LED photo frame with acrylic plate, one piece remote, one piece USB cable with manual ### 3. How to Use 1. Connect USB cable to USB power source or load 3pcs AAA batteries. 2. Touch the power button to turn it on (you can also use remote to turn it on). 3. Press power button to set light colors and light modes. 4. With remote control, you can set to 7 kinds of rgb lights, set brightness and light mode. 5. How to change acrylic plate? Unscrew the screw on the top of frame back and pull out the top cover. Pull out the acrylic plate and insert new acrylic plate. Put back top cover and tighten the screw. ![LED Photo Frame Manual](/files/-MbAJrFBFsdzbhbIP3wE) {% file src="/files/-Mhgqmme9CvyTEq39FwI" %} Download User Manual of TDL-TK Photo Frame {% endfile %} ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-P LED Photo Frame This manual is also applicable for TDL-PP, TDL-Plus. ### 1. Specification | Model Number | TDL-P TDL-PP TDL-Plus | | ---------------------------------------- | ------------------------------------------------------------ | | Color | Black | | Material | Plastic, PMMA (cast acrylic) | | Photo Frame Dimension | 25cm x 19cm x 2.3cm | | Net Weight (without Acrylic plate) | 295g | | LED Source | 11 pieces SMD LED | | Light Color | 16 Kinds of RGB Lights | | Power Input | 3xAAA battery (not included); DC 5V | | Unit Package Weight | 0.35KG (without acrylic plate); 0.56KG (with acrylic plate) | | **Suitable for acrylic panel thickness** | **1/8'', 3.2\~4mm** | | Certification | CE, RoHS | | Certification | 1 Year | ### 2. Packing List **TDL-P Packign List:** 1 Piece LED photo frame (without acrylic plate), 1 piece IR remote, 1 piece USB Cable (manual) **TDL-PP Packing List:** Each Set Includes: 1pc LED Frame Lamp with acrylic plate, 1pc IR Remote and 1pc USB Charge Cable and manual. Pack in mini color gift box. (USB Charger is not included) ![TDL-P LED Photo Frame Packing List](/files/-Mb9ZiWoyLal2y-4L59A) ### 3. How to Use 1. Connect USB cable to USB power source or load 3pcs AAA batteries. 2. Touch the power button to turn it on (you can also use remote to turn it on). 3. Put LED photo frame on the table to hang it up on the wall. 4. Press power button to set light colors and light modes. 5. With remote control, you can set to 16 kinds of rgb lights, set brightness and light mode. ![](/files/-Mb9vuyAyli5KxrQw_73) ![Remote Control Function](/files/-Mb7-qufrcLSiQ88Yq2g) 6\. How to put or change acrylic plate? Rotate the two holders on the backside of frame. Take out or put the acyrlic plate. Then lock up the backside frame back with the two mini holders. ![How to put or change acrylic plate](/files/-Mb9vobpoyAif73dvcWq) {% file src="/files/-Mhgpz8Brjho9KlET-O1" %} Download User Manual of TDL-P LED Photo Frame {% endfile %} ### 4. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-X Wall Plug LED Base This manual is also applicable for TDL-XP and TDL-XK. ### 1. Specifications | Model Number | TDL-X TDL-XP TDL-XK | | ----------------------- | --------------------------- | | Color | Black, white | | Material | ABS and Acrylic Plate | | Dimension | 50mm(L) x 32mm(W) x 42mm(H) | | Net Weight | 31g | | LED Source | 2pcs SMD RGB LEDs | | Light Color | 7 RGB Lights | | Power Input | AC 110\~230V | | Acrylic Plate (optical) | 9cm\*9cm\*3mm(thickness) | ### 2. Packing List TDL-X LED Base Packing List: one piece LED base with manual TDL-XP TDL-XK Packing List: One piece LED base, one piece acrylic plate with manual (optional blister package) ### 3. How to Use 1. Remove the transparent protective film from both sides of the acrylic plate. 2. Insert acrylic plate in 3D socket LED base. 3. Plug the led base into the wall socket. 4. It is automatic mode. When it is dark enough, it lights up automatically. When it is bright enough, it turns off. 5. Press the button to change light color. Each time the power button is pressed, the lamp will change light color. There are 7 light colors (red, green, blue, yellow, cyan, purple and white). There are also fading RGB light mode and flashing RGB light mode. ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) # TDL-BS1 Speaker LED Base TDL-BS1 LED base speaker has 7 kinds of light colors and built-in 1200mAh rechargeable battery. You can play music by connecting to mobile phones/PC via Bluetooth. Below is the PDF format user manual download link for TDL-BS1. {% file src="/files/-Mhgk0Dr823dAiaFaeZW" %} TDL-BS1 Speaker LED Base User Manual {% endfile %} ### 1. Specification | Model Number | TDL-BS1 | | ------------------- | ------------------------------------------------ | | Color | Black | | Material | Plastic | | Dimension | 85mm(W) x 85mm(L) x 52mm(H) | | LED Source | 8 pieces SMD RGB LEDs | | Light Color | Red, Green, Blue, Cyan, Purple, Orange, White | | Light Mode | Fading RGB. flashing RGB, music light mode | | Power Input | DC 5V 1A | | Output Power | 2\~2.5W | | Battery | Built-in rechargeable 1200mAh battery (included) | | Net Weight | 115g | | Unit Package Weight | 0.12KG | ### 2. Packing List 1 piece LED lamp base 1 piece USB charge cable (USB Charger is not included) ![](/files/-MhgkOpN7ae1XJhF88ib) ### 3. How to Use 1\. Remove the transparent protective films of acrylic plate. Insert the Acrylic panel into the base; 2\. Long touch the touch button for 4\~5 seconds to turn on the LED base speaker. 3\. Tap button to choose light color and light mode. 4\. Enable Bluetooth on mobile phone, search and pair to Bluetooth device LED lamp base "DDFG-X1" . 5\. Long touch the mode button for 4\~5 seconds to turn off the bluetooth speaker lamp base. ### 4. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to hold acrylic plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-BS Bluetooth Speaker Base This manual is also applicable for TDL-BSK lamp kit. ### 1. Specification | Model Number | TDL-BS | | ------------------- | ----------------------------------------------------- | | Color | Black, White | | Material | Plastic | | Dimension | 85mm(W) x 85mm(L) x 52mm(H) | | LED Source | 10pcs SMD RGB LEDs | | Light Color | Red, Green, Blue, Cyan, Purple | | Power Input | USB Cable or built-in rechargeable battery (included) | | Output Power | 2\~2.5W | | Battery | 2600mAH Li-ion battery | | Unit Package Weight | 0.195KG | | Certification | CE | ### 2. Packing List One piece Bluetooth Speaker LED Base, one piece USB cable with manual ### 3. How to Use ![](/files/-MbAGNJq0X3tUiJTSNO9) ![](/files/-MbAGNJsDKB9Jnu2N3EF) {% file src="/files/-MhgpIPDxjbjrRAqo9q0" %} User Manual for TDL-BS Speaker LED Base {% endfile %} ### 4. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to hold acrylic plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-D Mini Clock Base Please read all instructions and warnings before using clock led lamp. These instructions helps you obtain the best performance from this product. ### 1. Specifications: | Model Number | TDL-D | | -------------------- | ------------------------------------------------------------- | | Light Color | 7 kinds of RGB lights, fading RGB lights, flashing RGB lights | | Base Color | Black | | Base Weight | 90g | | Base Size | 10cm (L) x 7.2cm (W) x 4.2cm(H) | | Base Slot | 71mm(L) x 4mm(W) x 16mm(Depth) | | Power Input | 3xAA battery (not included); DC 5V USB | | LED Source | 10pcs RGB SMD LEDs | | Acrylic Plate Size | 14.5cm(W) x 20.5cm(H) (acrylic plate is optical) | | Acrylic Plate Weight | 80\~140g | ### 2. Packing List **TDL-D packing list：** LED base, USB Cable, Remtoe and manual (pack in foam bag) ### 3. How to Use * Connect USB cable to power supply/ computer or insert batteries, the clock will show time. * Remove the transparent covers from the both sides of acrylic plate and insert the plate into clock. * Touch the power button or use remote controller to turn on the LED lamp light. * To use touch power button, there are 8 light color mode, which includes 7 single colors mode (red, green, blue, yellow, cyan, purple, white) plus an alternating option. * To use remote controller for light color changing, please see bellow picture for function using. * Hold power button for 2\~4 seconds or use remote controller to turn lamp off. ![Remote manual for TDL-L clock base](/files/-Mb746XD7O5maiVtwL19) ### 4. Buttons on Colock ![Clock LED Base buttons](/files/-MbAE2KCrkWf1Oku9zCt) {% file src="/files/-Mhgpa8j5SihffoKWCLG" %} Download User Manual TDL-D Clock LED Base {% endfile %} ### 5. Cleaning Instructions Wipe acrylic with a clean soft cloth. Do not use abrasive cleaners as will damage surface. ### 6. Safety Instructions * This product is for indoor use only. * Before inserting the acrylic design into the base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as this will leave marks and may affect the 3D illusion. ![How to hold acrylic plate](/files/-Mb9SJQUAFJT1WK3mNlc) * Rechargeable battery inside , should be recharged under adult supervision . * Always switch the lamp off overnight or if left unattended. # TDL-S LED Base with Remote Please read this instruction before using the 3D lamp base. This user manual is for your safety and help you obtain the best performance from this product. ### **1. Specifications** | **Model Number** | TDL-S | | ---------------- | ------------------------------------------------------- | | Input Voltage | 4.5V-5V | | Power Input | USB Cable (included) or 3 x AA Batteries (not included) | | Output Power | 2 \~ 2.5W | | Number of LED | 10 pcs RGB SMD LEDs | | Light Color | Red, Green, Blue, Yellow, Cyan, Pink, White | | LED Base Size | 85mm(D) x 40mm(H) | | LED Base Weight | 70g | | LED Base Slot | 71mm(L)\*4mm(W)\*16mm(Depth) | | Packing | | | -------------------- | -------------------------- | | Unit Package Weight | 0.11KG | | QTY / CTN | 200 pieces each carton box | | Carton Dimension | 56cm x 45.5cm x 33CM | | CTN Net/Gross Weight | 21KG/22KG | ### 2. Packing List **TDL-S Packing List:** LED base, mini 15 Key IR Remote Control, USB cable, manual (pack in foam bag) ![TDL-S LED Base packing list](/files/-Mb72a30QnJeYvePvCRs) ### 3. How to Use 1. Remove the transparent protective film from both sides of the acrylic plate. 2. Insert acrylic plate in 3D LED base. 3. Connect USB cable to power supply/computer or load 3 pieces AA batteries. 4. Press the power button to turn on. 5. Press the power button to change light color. Each time the power button is pressed, the lamp will change light color. There are 7 light colors (red, green, blue, yellow, cyan, purple and white). There are also fading RGB light mode and flashing RGB light mode. 6. Long hold the button for 2\~4 seconds to turn it off. ![](/files/-Mb746XD7O5maiVtwL19) ![](/files/-Mb6yFAaP_N98VtSXYtF) ### 4. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to hold acrylic plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-S3 TDL-S2 TDL-SS Base The manual is applicable for TDL-S2 TDL-SS TDL-S3 led bases with remote. Please read this instruction before using the 3D lamp base. This user manual is for your safety and help you obtain the best performance from this product. ### **1. Specifications** | **Model Number** | TDL-S3 TDL-S2 TDL-SS | | ---------------- | ------------------------------------------------------- | | Input Voltage | 4.5V-5V | | Power Input | USB Cable (included) or 3 x AA Batteries (not included) | | Output Power | 2 \~ 2.5W | | Number of LED | 10 pcs RGB SMD LEDs | | Light Color | Red, Green, Blue, Yellow, Cyan, Pink, White | | LED Base Size | 85mm(D) x 40mm(H) | | LED Base Weight | 70g | | LED Base Slot | 71mm(L)\*4mm(W)\*16mm(Depth) | | Packing | | | -------------------- | -------------------------- | | Unit Package Weight | 0.11KG | | QTY / CTN | 200 pieces each carton box | | Carton Dimension | 56cm x 45.5cm x 33CM | | CTN Net/Gross Weight | 21KG/22KG | ### 2. Packing List **TDL-S3 TDL-S2 TDL-SS Packing List:** LED base, 24 Key IR Remote Control, USB cable, manual (pack in foam bag) ![LED Lamp Packing List](/files/-Mb7-K3chCMlIMtY152c) ### 3. How to Use 1. Remove the transparent protective film from both sides of the acrylic plate. 2. Insert acrylic plate in 3D LED base. 3. Connect USB cable to power supply/computer or load 3 pieces AA batteries. 4. Press the power button to turn on. 5. Press the power button to change light color. Each time the power button is pressed, the lamp will change light color. There are 7 light colors (red, green, blue, yellow, cyan, purple and white). There are also fading RGB light mode and flashing RGB light mode. 6. Long hold the button for 2\~4 seconds to turn it off. {% file src="/files/-MhgqL9tfFlwHQaVcLK-" %} Download User Manual TDL-S3 {% endfile %} ![Remote Control Manual](/files/-Mb7-qufrcLSiQ88Yq2g) ![](/files/-Mb6yFAaP_N98VtSXYtF) ### 4. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to hold acrylic plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-L Clock LED Lamp Base The manual is also applicable for TDL-LP TDL-LK lamp kit. Please read all instructions and warnings before using clock led lamp. These instructions helps you obtain the best performance from this product. ### 1. Specifications: | Model Number | TDL-L | | -------------------- | ------------------------------------------------------------- | | Light Color | 7 kinds of RGB lights, fading RGB lights, flashing RGB lights | | Base Color | Black | | Base Weight | 160g | | Base Size | 18cm (L) x 9cm (W) x 5.1cm(H) | | Base Slot | 16cm(L）x 4mm(W) x 2.1cm(Depth) | | Power Input | 4xAA battery (not included); DC 5V USB | | LED Source | 19pcs RGB SMD LEDs | | Acrylic Plate Size | 16.4cm(W) x 22.5cm(H) | | Acrylic Plate Weight | 150g | ### 2. Packing List **TDL-LP TDL-LK lamp kit packing list：** LED base, Acrylic Plate, USB Cable, manual (pack in gift box and foam) **TDL-L base packing list：** LED base, USB Cable, manual (pack in foam bag) ![TDL-LP TDL-LK lamp kit packing list](/files/-Mb76BFGILPEL7rfP3jc) ### 3. How to Use * Connect USB cable to power supply/ computer or insert batteries, the clock will show time. * Remove the transparent covers from the both sides of acrylic plate and insert the plate into clock. * Touch the power button or use remote controller to turn on the LED lamp light. * To use touch power button, there are 8 light color mode, which includes 7 single colors mode (red, green, blue, yellow, cyan, purple, white) plus an alternating option. * To use remote controller for light color changing, please see bellow picture for function using. * Hold power button for 2\~4 seconds or use remote controller to turn lamp off. {% file src="/files/-MhgqYFKEJJ6AsoN-xEs" %} Download User Manual TDL-L {% endfile %} ![Remote manual for TDL-L clock base](/files/-Mb746XD7O5maiVtwL19) ### 4. Buttons on Colock * Long press button “ M ” to set TIME, which will be Year- Month- Day- Time- Minutes- Seconds in turn. Press “+” and “-” to correct, and press “ M ” once to confirm after one is corrected. * Short press button “ M ” can show time and date on screen alternately. * short press button “+” turn on or turn off voice control mode. When it is on, then screen will be off after 9 seconds without sound, and the screen will show again when there is sound. * Short press button “-”, the screen will show the immediate temperature. ### 5. Cleaning Instructions Wipe acrylic with a clean soft cloth. Do not use abrasive cleaners as will damage surface. ### 6. Safety Instructions * This product is for indoor use only. * Before inserting the acrylic design into the base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as this will leave marks and may affect the 3D illusion. ![How to hold acrylic plate](/files/-Mb9SJQUAFJT1WK3mNlc) * Rechargeable battery inside , should be recharged under adult supervision . * Always switch the lamp off overnight or if left unattended. # TDL-F17 LED Wood Photo Frame ### 1. Specification | Model Number | TDL-F17 | | ------------------- | ------------------------------------------------------ | | Material | Solid beech | | Dimension | 17cm x 21cm x 2cm | | Net Weight | 190g | | Light Color | Red, Green, Blue, Yellow, Cyan, Pink, White | | Light Mode | Fading RGB light mode, Flashing RGB light mode | | Acrylic Plate | Optional 14cm\*19cm 5mm thick blank cast acrylic plate | | Power Input | DC 5V 1A | | Output Power | 2\~3 W | | Unit Package Weight | 0.2KG | | Certification | CE | | Warranty | 1 Year | ### 2. Packing List Each Set Includes: 1 piece wood LED photo frame with USB cable, 1 piece wood sticker support (USB Charger is not included) ![TDL-F17 LED Photo Frame Kit Packing List](/files/-Mb9jkoPXYb6WufcSWY5) ### 3. How to Use: 1\. Please connect USB cable to USB power adapter or computer. 2\. Press the “Mode” button and the LED strip light up. Below light color light up by turns. Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights. The final light color is red and then press Mode button to turn it off. 3\. Press “+” button to turn up brightness and press “-” to turn down brightness.
USB Cable Button Functions
### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-PRO 3D Lamp This manual is also aplicable for TDL-CP TDL-BK TDL-C TDL-CS. Please read this instruction before using our 3D lamp. This user manual is for your safety and help you obtain the best performance from this product. ### **1. Specifications** | Model Number | TDL-PRO TDL-CP TDL-BK TDL-C TDL-CS | | -------------------- | ------------------------------------------------------- | | Input Voltage | 4.5V-5V | | Power Input | USB Cable (included) or 3 x AA Batteries (not included) | | Output Power | 2 \~ 2.5W | | Number of LED | 10 pcs RGB SMD LEDs | | Light Color | Red, Green, Blue, Yellow, Cyan, Pink, White | | LED Base Size | 85mm(D) x 40mm(H) | | LED Base Weight | 70g | | Acrylic Plate | 14.5cm\*20cm (5.7'' x 7.87''); Big version: 18cm\*22cm | | Acrylic Plate Weight | 70g\~130g | | LED Base Slot | 71mm(L)\*4mm(W)\*16mm(Depth) | | Packing | | | -------------------- | ------------------------------ | | Unit Package Size | 21.5cm(L) x 15.5cm(W) x 3cm(H) | | Unit Package Weight | 0.3KG | | QTY / CTN | 40 pieces each carton box | | Carton Dimension | 56cm x 45.5cm x 33CM | | CTN Net/Gross Weight | 12KG/13KG | ### 2. Packing List **TDL-PRO TDL-CP TDL-BK Packing List:** LED base, USB cable, Acrylic plate, manual (pack in gift box and foam) **TDL-C TDL-C-White Packing List:** LED base, USB cable, manual (pack in foam bag) ![3D Lamp Kit Packing List](/files/-Mb6rFVwrWbwhrNQOFfi) ### 3. How to Use 1. Remove the transparent protective film from both sides of the acrylic plate. 2. Insert acrylic plate in 3D LED base. 3. Connect USB cable to power supply/computer or load 3 pieces AA batteries. 4. Press the power button to turn on. 5. Press the power button to change light color. Each time the power button is pressed, the lamp will change light color. There are 7 light colors (red, green, blue, yellow, cyan, purple and white). There are also fading RGB light mode and flashing RGB light mode. 6. Long hold the button for 2\~4 seconds to turn it off. ![](/files/-Mb6yFAaP_N98VtSXYtF) ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-WA Oval Wood LED Base TDL-WA night lamp has 7 RGB lights, flashing mode and fading light mode. It comes with USB cable and mode/brighter/darker buttons. The slot is 7cm long and 4mm wide. ### 1. Specifications | Model Number | TDL-WA | | ------------------- | ------------------------------------------------------- | | Material | Acrylic | | Dimension | Oval LED Base: 13.5cm(L)5.8cm(W)2.2(H) | | Net Weight | Round base: 96g; Oval Base: 80g | | Slot Dimension | Oval and round base: 70m(L)*15mm(Depth)*4mm(width) | | LED Source | 5pcs RGB SMD LEDs | | Light Color | 7 RGB lights, flashing mode and fading light mode | | Light Color | 10,000 hours | | Power Input | DC 5V 1A | | Unit Package Size | 22cm x 15.5cm x 4.5cm | | Unit Package Weight | 0.165KG | ### 2. Packing List: 1 piece LED Base with USB Cable (acrylic plate, gift box and foam are optical) ![TDL-WA wood base with acrylic and gift box](/files/-Mb9TQH5jpWI1DPOlYH6) ![TDL-WA Oval Wood Base Dimension](/files/-Mb9TQH7IOfXPq2olrBQ) ![TDL-WA Round Wood Base Dimension](/files/-Mb9TQH8vIjdQP7OBtPC) ### 3. How to Use (1). Insert the Acrylic panel into the base; (2). Please connect USB cable to USB power adapter or computer. (3). Press the “Mode” button and the LED strip light up. Below light color light up by turns. Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights. The final light color is red and then press Mode button to turn it off. (4). Press “+” button to turn up brightness and press “-” to turn down brightness. ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * To insert AA batteries, please slide off battery cover and load new batteries. * Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision. * Do not mix standard AA batteries with rechargeable ones. * Please do insert batteries with the correct polarity. * Please remove exhausted batteries timely. * Please always turn off the lamp overnight or when you do not use it. # TDL-K TDL-KP LED Keychain ### 1. Specifications | Model Number | TDL-K TDL-KP | | ------------- | ------------------------------------------- | | Color | Black | | Material | ABS and Cast Acrylic | | Net Weight | 24g | | Light Color | Red, blue, green, white, purple, ryan light | | Light Mode | Fading light mode and flashing light mode | | Working Time | 2.5\~4 hours | | Battery | 2 pieces CR1220 button batteries | | Acrylic Plate | 4mm thick acrylic plate (optional) | | Certification | CE, RoHS | | Warranty | 1 Year | ### 2. Packing List **TDL-KP Packing List:** 1PC LED Bud with key ring, 1PC Blank Acrylic Plate **TDL-K Packing List:** 1PC LED Bud with key ring ### 3. How to Use 1\. Tear off the protective films from the acrylic plate.\ 2\. Push power switch to “ON” position. 3\. Press the mode button to set light color and mode. Fading light mode→Flashing light mode→Blue→Green→Red→Cyan→Orange→Purple→White 4\. Push power switch to “OFF” position to turn it off. 5\. How to change batteries? Unscrew the 4 screws and take out old batteries. Load new CR1220 button batteries. ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) * Please put switch to "OFF" position if you do not use it for a long time. # TDL-ZP LED Acrylic Keychain This manual is also applicable for TDL-Z. ### 1. Specifications | Model Number | TDL-Z TDL-ZP | | ------------- | ------------------------------------------- | | Color | Black | | Material | ABS and Cast Acrylic | | Net Weight | 24g | | Light Color | Red, blue, green, white, purple, ryan light | | Light Mode | Fading light mode and flashing light mode | | Working Time | 4\~6 hours | | Battery | 1 piece 40mAh rechargeable Li-ion battery | | Acrylic Plate | 4mm thick acrylic plate (optional) | | Certification | CE, RoHS | | Warranty | 1 Year | ### 2. Packing List **TDL-ZP Packing List:** 1PC LED Bud with built-in li-ion battery, 1PC Keychain ring 1PC Blank Acrylic Plate, 1PC Mini USB Charge Cable **TDL-Z Packing List:** 1PC LED Bud with built-in li-ion battery, 1PC Keychain ring**,** 1PC Mini USB Charge Cable ### 3. How to Use 1\. Tear off the protective films from the acrylic plate.
2\. Push power switch to “ON” position. 3\. Press the mode button to set light color and mode. Fading light mode→Flashing light mode→Blue→Green→Red→Cyan→Orange→Purple→White 4\. Push power switch to “OFF” position to turn it off. 5\. Connect USB cable to 5V 1A USB power source. The red charge indicator will turn off when it is fully charged. 6\. Please put switch to "OFF" position if you do not use it for a long time. ### 4. Cleaning Instructions * Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate. ### 5. Safety Instructions * This product is designed for indoor usage only. It is not waterproof. * Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides. * Do not touch acrylic plate surface with your fingers as there will be fingerprints. ![How to Hold Acrylic Plate](/files/-Mb9SJQUAFJT1WK3mNlc) # PCB-20S USB LED Strip Please read this manual carefully before using our product and keep user manual in good condition in case for future reference. ### 1.Specifications | Model Number | PCB-20S | | ---------------- | -------------------------------------------- | | LED Strip Width | 4.5mm | | USB Cable Color | White (default), black | | USB Cable Length | 1.5 meter | | Material | Solid Beech | | Light Color | 7 Kinds of RGB Lights | | Light Mode | Fading RGB light and flashing RGB light mode | | LED Source | 8pcs RGB SMD LEDs | | Remote Control | Optional | | LED Strip Length | 5cm \~ 80cm | | Slot Dimension | 140mm(L)\*6mm(width) | | Power Input | DC 5V 1A (USB Port) | | Certification | CE | | Warranty | 1 Year | ### 2. Packing List One piece LED strip with usb cable ### **3. How to Use** **1.** Please connect USB cable to USB power adapter or computer. **2.** Press the “Mode” button and the LED strip light up. Below light color light up by turns. Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights. The final light color is red and then press Mode button to turn it off. **3.** Press “+” button to turn up brightness and press “-” to turn down brightness.
# PCB-30 PCB-40 PCB-100 ### 1.Specifications | Model Number | PCB-30 PCB-40 PCB-100 | | ---------------- | ------------------------------------------------------------ | | LED Strip Width | PCB-20S: 4.5mm; PCB-30: 6mm; PCB-40: 4mm; PCB-100: 10mm | | USB Cable Color | White (default), black | | USB Cable Length | 1.5 meter | | Light Color | 7 Kinds of RGB Lights | | Light Mode | Fading RGB light and flashing RGB light mode | | Remote Control | Optional | | LED Strip Length | 5cm \~ 80cm | | Power Input | DC 5V 1A (USB Port) | | Certification | CE | | Warranty | 1 Year | ### 2. Packing List One piece LED strip with usb cable ### 3. How to Use: 1\. Please connect USB cable to USB power adapter or computer. 2\. Press the “Mode” button and the LED strip light up. Below light color light up by turns. Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights. The final light color is red and then press Mode button to turn it off. 3\. Press “+” button to turn up brightness and press “-” to turn down brightness.
USB Cable Button Functions
# PCB-70 APP USB LED Strip This 4.5mm wide hard LED strip kit has millions of RGB lights, over 20 kinds light modes, music light mode. You can set the light colors, brightness, light model with remote control and smart Android ### 1.Specifications | Model Number | PCB-70 | | ---------------- | ------------------------------- | | LED Strip Width | 4.5mm (optional 4mm, 6mm, 10mm) | | USB Cable Color | Black (default) | | Light Color | Millions of light colors | | Light Mode | 20 kinds of light mode | | Remote Control | Yes | | LED Strip Length | 24cm or 50cm | | Power Input | DC 5V 1A (USB Port) | | Output Power | 50cm long led strip (7.5W) | | Net Weight | 45g | | Warranty | 1 Year | ### 2. Packing List 1 piece 5mm wide 5V USB LED Strip with USB Cable 1 piece RF remote control (optional) ### 3. How to Use: 1\. Please connect USB cable to USB power adapter or computer. 2\. Set light color, brightness, light mode with IR remote. 3\. Read manual, download APP and install APP on mobile phone. **Video Demo:** # PCB-80 Addressable USB LED Strip This 5mm wide flexible LED strip kit has 366 kinds light modes and 12 kinds of static light colors. You can set the light colors, brightness, light model with remote control. ### 1.Specifications | Model Number | PCB-80 | | ---------------- | ---------------------------------------------------- | | LED Strip Width | 5mm | | USB Cable Color | Black (default), white (optional） | | USB Cable Length | 1.5 meter | | Light Color | 12 kinds of static light colors | | Light Mode | 366 kinds of light modes | | Remote Control | Optional | | LED Strip Length | 30cm or 50cm | | Power Input | DC 5V 1A (USB Port) | | Output Power | 30cm long led strip (3.6W); 50cm long led strip (6W) | | Net Weight | 44g | | Warranty | 1 Year | ### 2. Packing List 1 piece 5mm wide 5V USB LED Strip with USB Cable 1 piece RF remote control (optional) ### 3. How to Use: 1\. Please connect USB cable to USB power adapter or computer. 2\. Set light color, brightness, light mode with IR remote. **Video demo:** ![Remote Control for addressable LED Strip Kit](/files/-MhfXUG8AYhVxPKVy360) # TDL-U6 Dual Light LED Bar LED light bar creates stylish illuminated signs with dual light colors and USB cable. ### 1. Specifications | Model Number | TDL-U6 | | ------------- | --------------------------------------------------------------------------- | | Color | Silver | | Material | Aluminum | | Net Weight | 53g | | Light Color | White and red, white and blue, white and green, blue and red, red and green | | Dimension | LED Bar: slot width 6mm, default length is 30cm | | Power Input | DC 5V 1A | | Acrylic Plate | For 1/8''\~1/4'' acrylic plate | | Warranty | 1 Year | | Accessory | 1 piece 40cm chain and 2 pieces U buckles | ### 2. Packing List 1PC LED Bar with USB Cable, 1PC Chain, 2PCS U Buckles ### 3. How to Use 1. Connect to 5V USB power source; 2. Turn it on, set light colors, brightness, light mode; 3. Insert acrylic plate and hang it up with chain and buckles. 4. Here is the download link for the guide to install with chain and buckles. Video Guide: {% file src="/files/-MhgdtGd1fCBLCKfRFxz" %} ![](/files/-Mhgf79MILirFLz_0sPr) ![](/files/-Mhgf79HHqwsVEQ25GFp) ![](/files/-Mhgf79JvlHpnIRRBk3N) ![](/files/-Mhgf79KAFVdIAgpsJBb) ![](/files/-Mhgf79LlWKofOt1Vbui) ### **4. Videl Demo:** ### # TDL-U15 LED Bar LED light bar creates stylish illuminated signs for car, retail store. The led edge lighting systems allow to create attractive illuminated projects without complexity or at big expense. We offer all ### 1. Specifications | Model Number | TDL-U15 | | ------------- | ---------------------------------------------------------------------- | | Color | Silver | | Material | Aluminum | | Net Weight | 70g | | Light Color | Red, blue, green, white, purple, ryan light | | Light Mode | Fading light mode and flashing light mode | | Dimension | U Bar: slot width 5mm, default length is 15cm. USB cable length: 190cm | | Power Input | DC 5V 1A | | Acrylic Plate | For 1/8''\~1/4'' acrylic plate | | Output Power | 2.3W (15cm led light bar) | | Warranty | 1 Year | | Accessory | 2 pieces Transparent Suction Cup | ### 2. Packing List 1 piece PC LED Bar with USB Cable, 2 pieces Transparent Suction Cup ### 3. How to Use 1. Connect to 5V USB power source; 2. Turn it on, set light colors, brightness, light mode; 3. Insert acrylic plate and fix it on smooth glass/wall etc with 2 pieces transparent suction cups. ### 4. Video Demo {% embed url="" %} ### 5. Free Acrylic Template {% file src="/files/-Mhgb\_zSDt6fpzOlVw2q" %} Free Acrylic Templates for TDL-U15 {% endfile %} Default length of TDL-U15: 150mm, hole diameter for suction cup: 59mm # TDL-U TDL-US LED Bar ### 1. Specifications | Model Number | TDL-U TDL-US | | ------------- | ---------------------------------------------------------------------- | | Color | Silver | | Material | Aluminum | | Net Weight | 75g | | Light Color | Red, blue, green, white, purple, ryan light | | Light Mode | Fading light mode and flashing light mode | | Dimension | U Bar: slot width 5mm, default length is 30cm. USB cable length: 190cm | | Power Input | DC 5V 1A | | Acrylic Plate | For 1/8''\~1/4'' acrylic plate | | Output Power | 4.5W (30cm led light bar) | | Warranty | 1 Year | | Accessory | 1 piece 40cm chain (or 55cm chain) and 2 pieces U buckles | ### 2. Packing List TDL-U packing list: 1PC LED Bar with USB Cable, 1PC Chain, 2PCS U Buckles TDL-US packing list: 1PC LED Bar with USB Cable, 1PC Chain, 2PCS U Buckles， 1PC Remote ### 3. How to Use 1. Connect to 5V USB power source; 2. Turn it on, set light colors, brightness, light mode; 3. Insert acrylic plate and hang it up with chain and buckles. 4. Here is the download link for the guide to install with chain and buckles. Video Guide: {% file src="/files/-MhgdtGd1fCBLCKfRFxz" %} Installation Guide For LED Bar TDL-U TDL-US {% endfile %} ![](/files/-Mhgf79MILirFLz_0sPr)![](/files/-Mhgf79HHqwsVEQ25GFp) ![](/files/-Mhgf79JvlHpnIRRBk3N)![](/files/-Mhgf79KAFVdIAgpsJBb) ![](/files/-Mhgf79LlWKofOt1Vbui) ### **4. Video Demo** ###
RF Remote for LED Bar TDL-US
# TDL-UU LED Bar LED Edge Lit Bar 5V USB Powered with Remote and Smart APP ### 1. Specifications | Model Number | TDL-UU | | ------------- | ------------------------------------------------------------------------ | | Color | Silver | | Material | Aluminum | | Net Weight | 93g | | Light Color | Millions of RGB lights | | Light Mode | 20 kinds of light mode, 2 music light modes | | Dimension | U Bar: slot width 5mm, default length is 30cm. USB cable length: 190cm | | Power Input | DC 5V 1A | | Acrylic Plate | For 1/8''\~1/4'' acrylic plate | | Output Power | 4.5W (30cm led light bar) | | Warranty | 1 Year | | Accessory | 1 piece remote,1 piece 40cm chain (or 55cm chain) and 2 pieces U buckles | ### 2. Packing List 1PC LED Bar with USB Cable, 1PC Chain, 2PCS U Buckles, 1PC Remote ### 3. How to Use 1. Connect to 5V USB power source; 2. Turn it on, set light colors, brightness, light mode; 3. Insert acrylic plate and hang it up with chain and buckles; 4. Scan QR code on LED controller and download APP. Enable bluetooth and set on APP. 5. **H**ere is the download link for the guide to install with chain and buckles. Video Guide: {% file src="/files/-MhgdtGd1fCBLCKfRFxz" %} Installation Guide For TDL-UU LED Bar {% endfile %} ![](/files/-Mhgf79MILirFLz_0sPr)![](/files/-Mhgf79HHqwsVEQ25GFp) ![](/files/-Mhgf79JvlHpnIRRBk3N)![](/files/-Mhgf79KAFVdIAgpsJBb) ![](/files/-Mhgf79LlWKofOt1Vbui) ### **4. Video Demo and guide:** ###