Comment on page
TDL-TK Table Photo Frame
One piece LED photo frame with acrylic plate, one piece remote, one piece USB cable with manual
- 1.Connect USB cable to USB power source or load 3pcs AAA batteries.
- 2.Touch the power button to turn it on (you can also use remote to turn it on).
- 3.Press power button to set light colors and light modes.
- 4.With remote control, you can set to 7 kinds of rgb lights, set brightness and light mode.
- 5.How to change acrylic plate?
Unscrew the screw on the top of frame back and pull out the top cover. Pull out the acrylic plate and insert new acrylic plate. Put back top cover and tighten the screw.
LED Photo Frame Manual
TDL-TK photo frame user manual.pdf
Download User Manual of TDL-TK Photo Frame
- Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate.
- This product is designed for indoor usage only. It is not waterproof.
- Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides.
- Do not touch acrylic plate surface with your fingers as there will be fingerprints.
How to Hold Acrylic Plate
- To insert AA batteries, please slide off battery cover and load new batteries.
- Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision.
- Do not mix standard AA batteries with rechargeable ones.
- Please do insert batteries with the correct polarity.
- Please remove exhausted batteries timely.
- Please always turn off the lamp overnight or when you do not use it.