Comment on page
TDL-S2S Dual Light LED Base
TDL-S2S 3D LED lamp base has dual ligth colors and includes IR remote and USB cable. There are 10 pieces LED totally. Left and right LED display 7 kinds light colors, fading flashing RGB separately.
Model Number | TDL-S2S |
Material | Plastic |
Dimension | 89mm(D) * 44mm(H) |
Net Weight | 72g |
Slot Dimension | 70mm(L)4mm(W)16mm(Depth) |
LED Source | 10pcs RGB LED |
Light Color | 7 RGB lights, flashing mode and fading light mode |
Light Color | 10,000 hours |
Power Input | DC 5V 1A, 3 pieces AA batteries |
1 piece LED Lamp Base (pack in foam bag), 1pc USB Charge Cable, 1pc IR remote control
1. Connect to USB power source with USB cable or load 3 pieces AAA batteries.
2. Insert acrylic plate.
3. Tap the button and control via remote control.
Remote control for TDL-S2S LED Base
- Please wipe the acrylic plate with clean soft cloth. Do not use abrasive cleaners as it will damage the surface of acrylic plate.
- This product is designed for indoor usage only. It is not waterproof.
- Before inserting the acrylic plate into the lamp base, please remove the transparent protective film from both sides.
- Do not touch acrylic plate surface with your fingers as there will be fingerprints.
How to Hold Acrylic Plate
- To insert AA batteries, please slide off battery cover and load new batteries.
- Rechargeable batteries need to be removed from the product before being recharged. It should be recharged under adult's supervision.
- Do not mix standard AA batteries with rechargeable ones.
- Please do insert batteries with the correct polarity.
- Please remove exhausted batteries timely.
- Please always turn off the lamp overnight or when you do not use it.
Last modified 2yr ago